Model F9341T

Model F9341T is a low cost high-performance terminated SP4T switch that operates over the full instantaneous bandwidth of 2 to 21 GHz with ON and OFF times of 500 ns. Design features include an integrated circuit assembly of PIN diodes mounted in a microstrip transmission line.
The Model F9341T has all of the output ports on one side while maintaining Amplitude and Phase matching between all output ports.
The Model F9341T is equipped with an integrated driver that is powered by +5 and –12 volt supplies. The proper currents required to switch the ports ON or OFF are provided by the driver, which is controlled by external logic signals.

PERFORMANCE SPECIFICATIONS

CHARACTERISTIC

SPECIFICATION

FREQUENCY RANGE (GHz)

2 to 21

MIN. ISOLATION (dB)

MAX. INSERTION LOSS (dB)

5.5

MAX. VSWR (ON/OFF)

2.5

Frequency range: 2 to 21 GHz
Isolation: 50 dB
In-line outputs
Phase and amplitude matched
Non-reflective
Decoder (Optional)
LVDS Interface (Optional)
RS-422/RS-485 Interface (Optional)

PHASE and AMPLITUDE MATCHING
Amplitude Matching …………………………………..1 dB typical
Phase Matching ………………………………………..12^otypical

SWITCHING TIME
ON/OFF Time ……………………………………………. 500 ns max.

POWER HANDLING CAPABILITY
Without Performance Degradation
OFF Port …………………. 100 mW cw or peak
ON Port ………………….. 1W cw or peak
Survival Power
OFF Port……………….. 1W average, 10W peak (1 sec max. pulse width)
ON Port ………………. 1W average, 75W peak (1 sec max. pulse width)

POWER SUPPLY REQUIREMENTS
+5V ……………………………………………… ±5%, 190 mA max.
-12V ±5% ……………………………………… 60 mA max.

CONTROL CHARACTERISTICS
Control Input Impedance ………………………. TTL, advanced Schottky, one unit load. (A unit load is 0.6 mA sink current and 20 μA source current.)
Control Logic ………………………………………. Logic “0” (-0.3 to +0.8V) for port ON and logic “1” (+2.0 to +5.0V) for port OFF.

OPTION (G09) ENVIRONMENTAL RATING
Operating Temperature Range ……………………. –54°C to +110°C
Non-Operating Temperature Range ……………… –65°C to +125°C
Humidity …………………………………………. ……… MIL-STD-202F, Method 103B, Cond. B (96 hrs. at 95%)
Vibration …………………………………………………… MIL-STD-202F, Method 204D, Cond. B (.06″ double amplitude or 15G, whichever is less)
Altitude …………………………………………………….. MIL-STD-202F, Method 105C, Cond. B (50,000 ft.)
Temp. Cycling …………………………………………….. MIL-STD-202F, Method 107D, Cond. A, 5 cycles

AVAILABLE OPTIONS
OPTION NO. DESCRIPTION
G09 Guaranteed to meet Environmental Ratings
G12 RoHS & Reach Compliantt
G18 REACH Compliant

DIMENSIONS AND WEIGHTS

Dimensions in mm (Inches) Tolerances, unless otherwise indicated: .XX ±.02; .XXX ±.005

2 to 21 GHz Model F9341T SP4T Switch

PERFORMANCE SPECIFICATIONS

DIMENSIONS AND WEIGHTS

Need a Custom Microwave Solution?