Non-Reflective SP4T SWITCHES
F9044 SP4T switch use an integrated assembly of PIN diodes mounted in a microstrip transmission line.
All models are supplied with integrated drivers. Standard units are supplied with logic that turns a port ON with the application of a logic “0” control signal. Maximum ON/OFF times are less than 50 ns.
F9044 SP4T switch use an integrated assembly of PIN diodes mounted in a microstrip transmission line.
All models are supplied with integrated drivers. Standard units are supplied with logic that turns a port ON with the application of a logic “0” control signal. Maximum ON/OFF times are less than 50 ns.
- 26 to 40 GHz frequency range
- Non-Reflective
- Low VSWR and Insertion loss
- 55 dB isolation
- Designed for Phase & Amplitude matched
PERFORMANCE CHARACTERISTICS
| Model | Parameter | Specification | ||
|
F9044 |
Frequency Range, (GHz) |
26 to 33
|
33 to 37
|
37 to 40
|
|---|---|---|---|---|
| Min. Isolation, (dB) |
55 |
55 |
55 | |
| Max. Insertion Loss, (dB) |
6.0
|
6.5
|
8.5 | |
| Max. VSWR (ON/OFF) |
2.5:1
|
2.5:1
|
2.5:1 | |
| 50 ns max. | |||||||||||
| Power Handling Capability | |||||||||||
| Without performance degradation | |||||||||||
| 1W cw or peak | |||||||||||
| 100 mW cw or peak | |||||||||||
| Survival Power | |||||||||||
| 1W average, 75W peak (1µsec max. pulse width) | |||||||||||
| 200 mW average, 5W peak (1µsec max. pulse width) | |||||||||||
| +5V ±5%, 375 mA | |||||||||||
| -12V ±5%, 250 mA | |||||||||||
| Control CHARACTERISTICS | |||||||||||
| TTL, advanced Schottky, one unit load. (A unit load is 0.6 mA sink current and 20 µA source current.) | |||||||||||
| Logic “0” (–0.3 to +0.8V) for switch ON and Logic “1” (+2.0 to +5.0V) for switch OFF. | |||||||||||
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||
| DIMENSIONS AND WEIGHTS
|
|||||||||||
Dimensions are stated in inches (mm). Tolerances, unless otherwise indicated: .XX ±.02; .XXX ±.008